Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Long Beach
A new driveway or security gate in Long Beach typically starts around $2,400 for a basic single swing gate with manual operation, while automated sliding gates on tight lots run $4,800 to $9,500 depending on steel gauge, finish, and operator. Most installations in Long Beach are completed in one day once materials are on site. If you’re standing in a driveway in Bluff Park, Belmont Shore, or Naples right now looking at a gate that won’t close, call us at (424) 999-7545 and a live person answers, day or night.
We know Long Beach lots. Many were laid out before cars got wide, before shared driveways got shared, and long before salt air from the Pacific and the Port of Long Beach started eating standard hardware for breakfast. That’s why our crews arrive in Long Beach with the right steel, the right finish, and the right operator for the job, not a catalog and a shrug. A live person takes your call 24 hours a day, seven days a week, and we will be there when we say.
Why Ironworks Gate Co. Is Long Beach’s Preferred Gate Installation Company
Long Beach homeowners have been calling us for gate work for years. Many learned about us the hard way, after another company installed a swing gate that blocked a shared walkway off 4th Street, or after a new powder coat bloomed with rust within six months in the port drift off 90802. Victor Salinas founded Ironworks Gate Co. in 1984, and he built the company on a simple rule: install it like it’s going on your own mother’s house, and stand behind it in writing. That rule applies on every Long Beach job, from a pedestrian gate on a craftsman bungalow in Rose Park to an estate slider in Los Altos.
Every completed job carries our 90-Day Done Right Promise. It’s written, it’s simple, and it means if anything is not right, we come back and make it right. No paperwork, no arguing. Our technicians are background-checked and uniformed, and they’re trained on nine gate automation brands, including LiftMaster, FAAC, and DoorKing. When a Long Beach customer calls about a gate that won’t open, we don’t send a general handyman. We send a gate specialist.
Long Beach’s housing stock spans 1910s craftsman bungalows, Spanish Colonial Revival homes in Bluff Park, mid-century tracts, and a dense concentration of older multi-family apartment buildings citywide. Those older properties often have gate hardware that has gone decades without an upgrade, and the HOA communities concentrated in 90802 and 90803 see daily vehicle and pedestrian gate cycles that reveal weak installations fast. We look at the gate, the driveway, the right-of-way, and the operator before we ever quote a number.
Our Gate Installation Services in Long Beach
We install and automate every type of residential and light commercial gate in Long Beach. Here’s what we do most, and how each one works on a Long Beach lot.
Driveway Gate Installation
Driveway gates in Long Beach usually come down to one question: swing or slide? On a wide lot in Los Altos or Bixby Knolls, a swing gate often works. On a narrow lot with a shared driveway, a swing gate becomes a liability. We measure setback, check the sidewalk line, and confirm right-of-way before we recommend anything. A typical manual driveway gate in Long Beach runs $2,400 to $4,200. Adding automation brings it to $4,500 to $8,000, installed.
Pedestrian Gate Installation
Pedestrian gates get used more than any other gate on the property, especially in Long Beach’s older neighborhoods where walkways connect front yards to alleys and side streets. We build pedestrian gates that close true and latch clean on the first try, from a simple 36-inch garden gate in a craftsman bungalow to a 6-foot security gate with a keypad at an apartment building in 90802. Expect $900 to $2,600 for most pedestrian gate installations here.
Sliding Gate Installation
Sliding gates are the answer to Long Beach’s tightest lots. When a swing gate would arc into the sidewalk, into a neighbor’s easement, or into the street, a cantilevered or rack-and-pinion slide gate uses horizontal travel instead of an arc. We install sliding gates on single-car driveways throughout 90801, 90802, and 90803. A manual sliding driveway gate in Long Beach generally runs $3,200 to $5,500; automated versions run $5,500 to $9,500.
Swing Gate Installation
Swing gates remain the most common style in Long Beach, particularly for driveways with enough setback for the leaf to open fully without crossing the property line. They’re also the most commonly misinstalled, especially where a shared driveway or a narrow side yard wasn’t accounted for. We use heavy-duty hinges, proper post reinforcement, and operators matched to gate weight and wind load. Installed swing gates in Long Beach typically cost $2,800 to $7,000 depending on leaf width, steel gauge, and automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Long Beach
Ironworks Gate Co. installs and services operators from nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. What that means for a Long Beach customer is simple. Whatever is on your driveway, whatever brand a previous installer put in, we already know it, we already stock parts for it, and we don’t need a second trip to diagnose it. We carry common components for DoorKing, Viking, and Elite operators in our local service vehicles, so a repair on a Naples Island pedestrian gate doesn’t wait on a parts shipment.
Common Gate Installation Problems We See in Long Beach Homes
- Rust bloom within months near the port. Weld joints and powder coat on new gates in the 90802 industrial corridor and western Long Beach sometimes show red rust streaks within a year. That happens when an installer skips marine-grade surface prep and uses standard mild steel hardware. We blast, prime, and powder coat every steel gate to marine spec, and we use 316 stainless hinges and latch hardware throughout Long Beach.
- Swing gates that block a shared right-of-way. Long Beach has a lot of shared driveways, especially in older neighborhoods and on flag lots. A swing gate that looked fine in a catalog can block the neighbor’s walkway or the sidewalk itself. We check that before we order steel, and if swing won’t work, we show you a slide gate that will.
- Operators sized for the showroom, not the driveway. An automatic gate on an HOA property in 90802 or 90803 cycles dozens of times a day. A light-duty opener will overheat and fail in months. We size the operator to the gate’s weight, the wind load, and the daily cycle count, not the price tag.
- Entrapment protection that never gets tuned. Automatic gates on apartment buildings and HOA communities in Long Beach are required to pass entrapment protection. We see loop detectors that were never tuned for heavy vehicle queuing and photocells misaligned by a bump. On every automatic installation we set the loops, align the photo eyes, and demonstrate the safety functions before we leave.
Pricing for Gate Installation in Long Beach, CA
Here are honest numbers for the Long Beach market, based on what we quote and install here week to week.
- Manual pedestrian gate: $900 to $2,600
- Automated pedestrian gate with keypad: $2,800 to $4,500
- Manual single driveway swing gate: $2,400 to $4,200
- Automated single driveway swing gate: $4,500 to $7,200
- Automated double driveway swing gate: $6,500 to $10,500
- Automated sliding driveway gate (cantilever or rack-and-pinion): $5,500 to $9,500
- Marine-grade stainless hardware upgrade (required on Naples Island): included, never optional
What moves the price? Steel gauge and gate weight, the operator brand and duty cycle, site access and footing work, and whether we’re tying into an existing access control system. The price we quote is the price you pay, agreed before a single bolt is turned. We offer a free estimate on every installation, and we provide written pricing before any work starts. Call (424) 999-7545 for a number specific to your driveway.
We Also Serve Cities Near Long Beach
Our Long Beach crews regularly install gates in Long Beach and the surrounding communities: Los Alamitos, Cypress, La Palma, and Huntington Beach. If you’re outside the immediate Long Beach area, call us anyway. We schedule work across the metro every week, and we’re glad to give you a straight answer about timing.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Long Beach
If you live in 90803, especially Naples Island or Belmont Shore, you need marine-grade stainless hardware. On Naples Island, where canal-front homes sit feet from tidal saltwater, standard galvanized hinges can rust through in under two years. We’ve watched it happen. Our crews pre-load 316 stainless steel hardware and specify industrial marine-grade powder coat for every Long Beach coastal installation, and we don’t charge an upsell for it. The marine environment here isn’t optional, so the hardware isn’t either. Call (424) 999-7545 and we’ll tell you what your specific street needs.
Usually not, and we will tell you that before you spend a dollar. If your driveway is shared with a neighbor, or if your property line sits closer than four feet of setback from the sidewalk, a swing gate will either block the neighbor’s access or the public walkway, and the city can require you to remove it. The correct solution is usually a sliding cantilever gate that travels parallel to the fence line and never swings into anyone’s path. Call us at (424) 999-7545 for a free site check.
A sliding gate does not need your driveway to be wide, it needs lateral room beside the driveway for the gate to travel into. On a narrow single-car driveway in Long Beach, we use a cantilevered rack-and-pinion slide gate that rides on rollers and hangs over its track, so the driveway itself stays clear of track grooves that trap salt and sand. The gate parks along the inside of the fence or wall when open. If you have at least the gate’s width in clear side space, a slide gate works. We’ll measure it and tell you straight. Call (424) 999-7545 for a free assessment.
Yes. The air in western Long Beach and the 90802 industrial corridor carries corrosive particulate fallout from the Port of Long Beach, one of the busiest port complexes in the world. Combine that with the persistent marine layer and onshore flow, and standard operator housings and circuit boards corrode faster here than almost anywhere else in the metro. We install operators here with sealed enclosures, marine-rated connections, and corrosion-inhibiting compounds on every exposed terminal. Then we coat the steel frames accordingly. This isn’t an upsell; it’s what keeps a gate working in west Long Beach past the first rainy season. Call (424) 999-7545 and ask us about the specific conditions on your street.
We run the work off the walkway, not into it. On Naples Island in 90803, where canal-front homes sit along narrow pedestrian paths inches from tidal water, we stage materials on the driveway side and keep a temporary pedestrian gate operational whenever we’re working on an entry point. If there’s no room to stage, we deliver in phases. We installed a sliding driveway gate for a Spanish Colonial Revival home in Bluff Park where the original swing gates would have swung directly into a shared pedestrian walkway. With only 18 inches of setback behind the property line, we set a cantilevered rack-and-pinion slide gate with a LiftMaster operator, ran a loop detector inside the driveway apron, and kept a temporary pedestrian gate operational through the whole job so the neighbor’s dog-walker never lost access. That is how the work gets done on a tight Long Beach lot. Call (424) 999-7545 to schedule a look.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Long Beach since 2001.