A Ironworks company - serving Huntington Beach, CA

Linear Keypad & Intercom Repair Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators
Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Linear Keypad & Intercom Repair: The Huntington Beach Owner’s Guide

We stock and install Linear-compatible keypads and intercoms throughout Huntington Beach, and a typical keypad replacement runs $220 to $410 installed, including the part, wiring check, and programming. Most intercom repairs land between $180 and $340, depending on whether the issue is the handset, the wiring, or the board inside the master unit. The usual way homeowners discover the failure is simple: the keypad lights up but the gate won’t move, or the intercom rings the house but nobody can hear anyone speak. It’s rarely the gate operator itself, and it’s almost always a part we carry on the truck.

Call (424) 999-7545

Victor Salinas has seen this exact failure pattern for decades along the Huntington Beach coast, and the salt air doesn’t do electronics any favors. The good news is that this is one of the fastest repairs we do. When the part is in the truck, most keypad and intercom jobs in Huntington Beach are finished in a single visit, with the price quoted and agreed before any work begins.

Which Linear Models This Applies To

Linear has made a long run of access control products, and the parts are not all interchangeable. The most common units we service in Huntington Beach are the Linear AK-11 and AK-15 exterior keypads, the Linear AM-KPX keypad, and the Linear AE-500, AE-100, and AE-2000 telephone entry and intercom systems. If you have an older Linear AE-100, that unit has been discontinued for years, but a quality replacement part or an upgraded equivalent is available, and we can match the wiring so the new unit talks to your existing gate operator.

The easiest way to identify what you have is to open the front cover and look at the label on the inside of the housing. The model number is printed there, usually above the wire terminals. The gotcha we see often in Huntington Beach is this: a homeowner buys a replacement keypad online based on a photo, only to find the new keypad is a 12-volt unit and the old one ran on 24 volts, or the wire count is different. Linear made both. We match the part to the label and the existing wire run, not to what the gate looks like from the street.

We’re an independent gate company, not affiliated with Linear, so we have no reason to push one brand over another. What we stock for Linear systems includes OEM parts where they’re still available, and proven aftermarket equivalents where the OEM part has been discontinued. You’ll know which one you’re getting and why, before we quote the price.

Signs Your Linear Keypad & Intercom Is Failing

  • The keypad beeps but the gate doesn’t open. The keypad is sending a signal, but the relay inside the keypad or the wiring to the operator has failed. This is the most common call we get, and it usually means the keypad itself needs replacement rather than the gate motor.
  • Some buttons work, others don’t. Linear keypads use a membrane or individual button contacts, and coastal moisture eventually corrodes the contacts. If the “9” and the “#” stopped working but the rest are fine, the keypad is on its way out.
  • The intercom rings the house but you can’t hear the visitor. This points to a failed speaker in the exterior unit or a wiring break between the exterior station and the indoor handset. It’s rarely the handset itself, but we test the full run before we replace anything.
  • The visitor can hear you, but you can’t hear them. The microphone in the exterior unit has failed, usually from moisture intrusion. Huntington Beach’s marine layer is hard on these, and we see this on units as young as five or six years old.
  • The keypad works sometimes, or after pressing buttons hard. Intermittent operation is the classic sign of a dying keypad. The relay or the button contacts are at the end of their life, and it won’t heal itself. It will fail for good on the day you most need it to work.

Replacement Cost & What’s Included

In Huntington Beach, an installed Linear keypad replacement runs $220 to $410. The range comes down to which model you have, whether the wiring can be reused or needs to be re-pulled, and whether the keypad is a standalone unit or part of a telephone entry system. A Linear intercom repair typically falls between $180 and $340, and that covers diagnosis, the replacement part, and the labor to make it right.

Every quote we give is upfront and set before a single bolt is turned. You’ll know the cost of the part, the cost of the labor, and what’s covered under our 90-Day Done Right Promise. That’s a written guarantee on every job we complete: if it’s not right, we come back and make it right, no paperwork, no arguing. For exact pricing on your Linear model, call us at (424) 999-7545, and we’ll give you a straight number before we ever set foot in the driveway.

DIY or Call Us?

There are a few things you can check safely before calling. Confirm the breaker for the gate operator isn’t tripped, and check that the keypad’s wiring connections at the operator are still tight. If you’re comfortable with a screwdriver, you can also open the keypad and look for obvious corrosion or water inside the housing. What we don’t recommend is rewiring a Linear keypad or intercom on your own, especially on a system that controls your street-facing gate.

The wire colors on Linear units don’t always match from one model year to the next, and crossing the wrong pair can take out the control board on your gate operator, which turns a $300 repair into a $900 one. If the keypad lights and the gate still won’t move, the problem is likely in the keypad relay or the operator’s receiver, and that’s a job for someone who does this every day. Tell us what it’s doing, or not doing, and we’ll figure out the rest from there. Call (424) 999-7545 and we’ll talk through it, no charge for the conversation.

FAQs

Call Ironworks Gate Co. for Linear Keypad & Intercom Repair in Huntington Beach

If your Linear keypad or intercom is failing, call us at (424) 999-7545 for a free estimate and an honest answer. We’ll tell you what’s wrong, what it costs to fix, and when we can get there. A live person answers the phone 24 hours a day, seven days a week. Whether you need a keypad replaced, an intercom wiring repair, or a second opinion on a written estimate, we’ll give you the straight story and honor our 90-Day Done Right Promise on every job. No surprises, no pressure, just a gate that works the way it should.

Written by Victor Salinas, Owner & Lead Gate Technician, Ironworks Gate Co. at Ironworks Gate Co., serving Huntington Beach and nearby areas.

Need Gate Repair help in Huntington Beach? Licensed & insured · same-day response · free estimates
Call (424) 999-7545
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

When you send us your details, you agree to our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch